Granite is regarded as one of hardest of the natural stones with distinctive characteristics such as color variations and pitting, making your counters all the more exceptional. Being a low maintenance material, scratching and staining on surfaces could be considered rare. This does not mean that accidents will not occur.

We would like to take this opportunity to provide some recommendations for easy care and maintenance of your stone to assure your granite's radiance.

SEALER:

During the installation of your stone a coat of impregnator (sealer) was applied, which provides a long lasting shield to protect the inside of the stone from stains and contaminants. Continued, yet easy and minimal maintenance will be required in order for you to preserve the stone's natural beauty and rely on it as an excellent surface.

SDC suggests that you maintain your stone yearly by applying a thin coat of standard sealer (we recommend 511 Impregnator which can be purchased at most hardware stores or home improvement stores) to the surface.

Here are some simple instructions for sealing maintenance:
Pour sealer onto clean rag.
Cover small area with sealer (SDC suggests working in small areas).
Allow sealer to penetrate approx 1 minute; but not allowing it to fully dry onto surface.
Taking clean rag, buff off any excess.

MAINTENANCE:

- Most granite surfaces can be easily cleaned using a soapy washcloth or sponge and hot water.
- A mixture of white vinegar and water, brings out the shine and luster.
- A razor-blade slanted at a slight angle can be used to remove stubborn sticky materials.
- Residue can also be removed using "a "000" (or finer) steel wool.

NOT RECOMMENDED:

Remember, just because your stone is sealed, does not mean it can not be penetrated. There are nuisances to your stone and you need to take caution when working with materials that stain, for instance: